Portable Car Wahser Motor Vehicle Cleaning Electric Car Cleaner DIY Cleaning Battery Cleaning Washing DC Cigarette Lighter Car Washing

DIY CAR Motor cleaner

Electric car washer
120W, DC12V, 9A
Water flow: 3.5-6.5L/min
Pressure: 145PSI
G. W.: 6.5/7kg
Firstly thanks for your use of our portable multi-function car washing machine. The washing machine adopts Italian motor technology, and has the performance of low noise, fast speed, strong pressure, and stable. The pump head uses dual filter with water. The outer body of the motor is with spray paint steel and fuel injection and fully sealed waterproof. The components are made of stainless steel. The high-pressure water gun is cooper-specific and has variety of water. The car washing machine is with multi-function of quick and free combination. It is the necessary washing machine product which is flexible and convenient portable.
I, Safety and precautions
1. Prohibits the use of spray gun at people and animals, or used to wash the engine, so as not to cause harm.
2. The machine uses special adapter of DC12V10.5A/AC100V ~ 220V power supply, PLS make sure before use.
3. When using the NE-310 type machine, PLS place the engine in the idle speed, to prevent the loss of car battery power.
4. The machine is built-in thermal protection system, a single continuous water no more than 30 minutes is appropriate.
5. After each use, it must be drained high pressure water within the high pressure pump. Relief can extend using life.
6. In winter to prevent water insde the machine ice, PLS spray water again for some time, until the water is drained.
II, Using instruction
Launch car engine---Plug in the NE310A power---close the door-first wet the car---then brush the car-then wash the car.
1, Open the spray gun, and empty the inside air, turn the water barrel to adjust water shape, adjust the spray nozzle to mist,
Wet the car body, wheels, and rinse dust on the car surface.
2, The pump membrane is anti-acid, anti-alkali, anti-chemicals. Dilution of the washing liquid, then use the machine to spray
The liquid on the car in mist shape.
3. Modulate the nozzle to scattering shape, make the spray and car body in a bevel and wash the car, starting wash from top to
Bottom.
4. Pull out the water filter head and use our special quick connector, which can access to the tap water to supply water.
(Special note: Access to tap water, the water pressure should not exceed 4 kgs. )