New Power Progobd2 with Reset Button Power Prog Red for Diesel Cars Chip Tuning Box Plug & Drive
| Price: |
Negotiable/Piece |
| Min Order: |
10/Piece |
| Pay Type: |
L/C,T/T,Western Union,Paypal,Money Gram |
Why we need to reset the device ??? -Before you save power or enhance the performance of your car, you need to get the ECU information and driving habits by connecting the device with your car.
Then you need to reset the it after you changed a car.
Or reset it after you drived a period ( Deponds on different roads and operations)
So we add the reset button on the device to help you use it more conveniently.
Descriptions: 1. It is a Plug & Drive Ready device to function the increasing the performance of engine.
2. It is easy to install. Just plug it into the OBD2 connector of cars. Fits all car from the year of 1996.
3. It works based on OBD2 protocols as remaping the Car's computer ECU. After driving 200 km road total, it adjusts itself to the car, according to the drivers' habits and always keeps remaping the ECU to increase the performance of engine.
Functions: According to your driving habits, it makes new map in the car's computer ECU to increase the performance of your car.
As you driving much more KM/Mile, it renews the map. Thus it keeps the vehicle's power and torque increasing.
How Does It Work? 1. It is a Chip Tuning Box which can be plugged into OBD2 connector of your car to increase the performance of your car.
2. When it plugged into OBD2 connector, it receives the information from the car computer ECU.
3. With the received data from ECU, it adjusts the boost pressure, quantity of fuel, injection timing and pressure to increase the performance of your car.
4. It does not exceed the manufacturer requirements. It works only within the tolerance of the engine.
5. It finds out the hidden power of your car. Does not damage the engine and the car computer ECU or not cause any negative effects to the car factory setting.
6. It does not change any of the settings permanently. To turn back to the car's original settings, just unplug NitroOBD2 from OBD2 connector.
Features: 1. Finds out the hidden power of your car. - Up to 35% more power
- Up to 25 % more torque
2. Very easy to use. ·Plug NitroOBD2 into OBD2 connector of your car. And turn the ignition on for 30 seconds. And Turn the engine on.
·NitroOBD2 settings are optimal and the best for your car. Even the parameters are different for each vehicle, there might not be a need to make an additional adjustment. NitroOBD2 will recognize your vehicle and your driving habits after around 200 km/150 miles driving, and then NitroOBD2 adjusts itself to match your car perfectly.
·NitroOBD2 works on the basis of changing the signal form ECU. As a consequence, it changes the whole injection map.
·The main difference between NitroOBD2 Chip Tuning Box and Remapping tuning methods is that NitroOBD2 Chip Tuning Box is easily removable, and after unplug you go back to the factory settings. EcoOBD2 is the cheap and safe type of tuning.
Remapping is a permanent change to your car. This is the expensive tuning and you cannot remove it.
3. Equipped with the engine protection function and 100% safe for your car engine.
4. Produced on the printed circuit board in SMD technology.
5. High quality.
6. Red color for Diesel Cars
Yellow color for Gasoline Cars.
Each device available for LPG.
Installation & Calibration: 1 - Pull the Car Key out from the ignition.
2 - Find OBD2 connector(*) in your car and Plug in.
3 - Insert the key into the ignition and twist the key to the first stage. (Do not start the car)
4 - Press the reset buttom for about 5 sec. After releasing the buttom, just wait for a while about 30-54 sec. (It will communicate and establish connection with ECU)
5 - Start up the engine.
6 - It will recognize your vehicle and your driving habits, after around 200 km/150 miles driving and thus EcoOBD2 will adjust itself to match your car perfectly for more fuel saving.
About Vehicles' OBD2 Connector:
Does your car have OBD2 connector?
On-Board Diagnostics, or "OBD," is a computer-based system built into all 1996 and later light-duty vehicles and trucks, as required by the Clean Air Act Amendments of 1990.
OBD systems are designed to monitor the performance of some of an engine's major components including those responsible for controlling emissions.
OBD2 necessarily for cars:
- Sold after January 1, 1996 in the USA
- Sold after January 1, 2001 in the European Union
- With diesel engine sold after January 1, 2003
(*)Where located OBD2 connector in your car? 1. Driver's side, underneath dasboard, in the area under the steering
column,
2. Driver's side, underneath dasboard,between the driver-side door and steering column area
3. Driver's side, underneath dasboard, between the steering column area and the center console
4. Driver's side, dashboard instrument/gauge area, between the steering column and center console
5. Driver's side, dashboard instrument/gauge area, between the driver-side door and steering column
6. Center console, vertical surface left of vehicle centerline
7. Center console, vertical surface right of vehicle centerline or on passenger side of center console
8. Center console, horizontal surface in front passenger area.
Certificates : CE / FCC / RoHS
| Prod Model: |
SC02-K02 |
| After-Sale Services: |
One Year Warranty |
| Language: |
English |
| Model Number: |
Progobd2 for Diesel |
| Color: |
Red |
| OEM/ODM: |
Yes |
| Function: |
Same Function as Nitro OBD2 |
| Highlight: |
More Power&Torque Than Nitro OBD2 |
| Special Feature: |
Finds out The Hidden Power of Your Car |
| Update Method: |
by Email |
| Testing Equipment Type: |
Code Reader |
Shenzhen Kingbolen Electrics Technology Co., Ltd., founded in 2005, is a comprehensive enterprise dedicated to the research, development, manufacture and international sale of automotive diagnostic tools, auto key programmers, odometer correction tools, auto programmers and auto cables, such as launch X431 PRO, X100 PAD, X100 PRO, VAS5054, LEXIA3, CAN Clip, CDP, Digimaster3, Handy-Baby, VAG cable and so on.
We provide OEM/ODM services for customers around the world. We have established a global network that helps us work closely with customers and met customer's requirements in a faster speed. Kingbolen has established long-term strategic relationships with many Chinese factories in automotive electronic industries. Currently, we are exporting more than 95% of our products to clients in West Europe, USA, Africa, Southeast Asia and the Middle East. We have implemented a comprehensive quality control system.
Our company persists in the service goal of "Quality, honesty, professionalism and innovation". We do hope "Kinbolen" will become world famous brand in the near future.
