2 PCS CV Boot Clamp Pliers Set

Product Description

Features:
The perfect set for fast and simple tensioning and securing of CV boot banding strap.CV boot clamp installer With a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively.This tool is essential for fixing CV boots CV joint boot clamp plier set Heavy-duty pliers with steel jaws and formed handles for extra comfort in use.Suitable for ear-type hose clips found on fuel, cooling system and vacuum hoses.Can also be used for securing late model GM CVJ boot clamps.Crimps and flattens clamps on ear type CV joint boot clamps.


Specifications:
Heavy Duty
Comfortable double dipped handles
Hardened steel
CV boot clamp installer
To be used with any banding up to 10mm in width
CV Boot & Hose Clamp Pliers Ear Type
Crimps and flattens clamps on ear type CV joint boot clamps
For installing CV Clamps
Standard banding tool for CV Joint Boots

Instructions:
1.Wrap free-end Clamps 3/8 inch or 1/4 inch roll band and clip around boot.Theread the band throught the nose of the tool and through the winding mandrel slot.
2.Place a 1/2 inch ratchet wrench on the winding mandrel and turn.When sufficient tension has been applied,rotate the tool over the boot, bending the band back onto the clip.
3.It applies tension and has a built-in cutter.
4.To complete clamping, fold down the remaining tail of the band into the clip and secure it by tapping down the ears of the clip.Note:For added strength, double-wrapped band is recomended.


Contact Us:
ACE Industry Co., Ltd
Add: No. 2888 JiuXin Rd, Shanghai, China.
Contact Lady: Ms. Riya Yu
TEL: +86-21-37623323 *8006
Fax:  +86-21-37623467
Mob: +86-186 16 373751

If you are interested in, please clink "Send" now!