The VAS 5054A is a universal diagnostic interface for the vehicles of the V olkswagen Group and all OBD vehicle Systems from other manufacturers.
The integrated Bluetooth interface connects the vehicle with a notebook, desktop PC or test system.
No cables are needed for vehicle diagnostics using the VAS 5054A.
The range of the wireless Bluetooth connection is 5 to 10 meters, depending on the environment and the Type of Bluetooth adapter used on the PC side. The Serial Port Profile (SPP) is used for data transfer via Bluetooth. Different Bluetooth security levels are supported.
The following vehicle bus systems are supported:
K line (ISO9141-2)
High-speed CAN (ISO 11898-2)
Low-speed CAN (ISO 11898-3)
J1850 (SAE J1850)
The vehicle protocols are handled directly in the VAS 5054A. This ensures fast response times and a reliable real-time behavior independently of the PC operating system. Every time a connection is established, the VAS 5054A software is Synchonized with the version installed on the application PC. The VAS 5054A thus automatically Adopts any new features provided after a new software version has been installed on the application PC. The diagnostic application and the associated Diagnostic Base System are installed on the application PC. The Diagnostic Base System can access the VAS 5054A via Bluetooth or USB.
Access via Bluetooth:
After a connection to the VAS 5054A has been set up, the Bluetooth software provides a virtual serial COM port (Bluetooth Serial Port Profile). The Diagnostic Base System uses this COM port to communicate with the VAS 5054A.
You need to specify this port when you install the diagnostic application.
Access via USB: You can also connect the VAS 5054A to the application PC by using the supplied USB cable.
Windows detects the VAS 5054A through Plug and Play, and automatically installs the drivers copied when you Installed the diagnostic application. Setup of the VAS 5054A is then complete and the device is ready for use By the diagnostic application.
We are specialist in manufacturing Automotive cable assembly&connector assembly with more than ten year`s experiences in this field. We produce high quality cables and connectors to meet various international standards.
We establish new department in 2012. We provide low pressure molding tooling design. The low pressure technical used in automotive electronic, cables, medical and military application, PCBA, sensors, cell phone batteries and etc...
In our manufacturing process, we use profecsional knowledge of engineering and strict quality control to fully standardize manufacturing conditions.
Our range of product is wide enough to cater for most of your requirements. Our production and engineering capabilites are extensive enough to ensure the best solution to your cabling needs.
And finally we can offer you a very resonable price. We hope we will have a good cooperation in near future.
From since our construction, there has been a decade of static Zhan manufacturing technology, electrical appliances have important gatekeeper, appearance is always beautiful (continuous innovation), our service has always been punctual delivery, any not satisfied place, the quality we have professional staff for your turn into service and, our service tenet: Customer first, do not find the perfect products, but can be do better more high-quality service attitude ~~~~~!
