| The CV JOINTS for | 2009 HONDA ACCORD 2.2 diesel . |
| Certification: | ISO9001,TS16949. |
| Size: | Normal Size. |
| The Payments: | T/T , 30% in advance,balance before shipment. |
| MOQ: | 100 |
| The delivery time: | 45-55days |
| Packaging Details: | Standard packing or according to the requirements. |
The CV JOINTS is conclude inner driveshaft CV JOINTS and outer driveshaft CV JOINTS.
The inner driveshaft CV JOINTS conclude manual and automatic, kits include Oil, BOOT and Clamps.
The outer driveshaft CV JOINTS kits include Oil, BOOT, Clamps and Nuts.
Constant-velocity joints (aka homokinetic or CV joints) allow a drive shaft to transmit power through a variable angle, at constant rotational speed, without an appreciable increase in friction or play. They are mainly used in front wheel drivevehicles, and many modern rear wheel drive cars with independent rear suspension typically use CV joints at the ends of the rear axle halfshafts and increasingly use them on the propshafts (drive shafts).
Constant-velocity joints are protected by a rubber boot, a CV gaiter. Cracks and splits in the boot will allow contaminants in, which would cause the joint to wear quickly.
A CV joint, or constant velocity joint, is part of a drive shaft, the shaft that attaches to a car's transmission at one end and the wheel at the other. These joints are designed to be able to bend in any direction while continuing to turn the drive wheels at a constant velocity. They are primarily used in the drive shafts of front wheel drive cars.
Due to bumps and uneven surfaces in the road, a car's wheels tend to move up and down continuously while driving down the road; as a result, drive shafts cannot be made up of a solid shaft. The CV joint's precursor, the universal joint, was used in the drive shafts of rear wheel drive cars because of its ability to bend in any direction. With the advent of front wheel drive cars, however, car manufacturers had a new problem: the joints in the drive shafts needed to account not only for the up-and-down motions of the wheels, but also for the back-and-forth motions of steering. The CV joint is used in front wheel drive cars because of its ability to maintain a constant drive force to the wheels despite the many different kinds of movements in the front end of the car. It is often used in rear wheel drive and four-wheel drive cars, as well.
Hangzhou Joyui Auto Parts Co., Ltd., understanding our customers, we care about the future of our business. Up to today, with reasonable price and good quality, all our products sell well in the international marketing. We want to ensure that you get our good service, only high quality and speedy delivery. We sincerely want to supply you with high quality products and perfect service based on our efficient management and professional work teams. Because professional, so trust!
T&J Driveline International Co., Ltd. is one of the leading manufacturers and traders of the driveline parts in China. We have been specialized in the automotive industry for more than ten years. Our leading products include wheel hubs, center support bearings, universal joints, drive shaft, driveline components, C. V. Joints, engine bearing, etc, which are mainly exported to Europe, USA, South America and Middle East. With the rapid growing of our business in the world market, so far we have established following factories invested by our Group company.
Driveline components Factory. It has a strong R&D team which enables us to develop any new parts according to customer's requirements and it manufactures a big variety of driveline parts with more 5000 items for different cars, consisting of Drive shaft, Center yoke, Companion flange, Coupling, End yoke, Flange yoke, Slip yoke, Stub shaft, Weld yoke, etc.
Wheel hubs Factory. It has a strong capability of research and development as well as perfect production management system which guarantees our good quality and timely delivery. Its production capacity reaches up to 20, 000 sets per month.
Center Bearing Factory. It specializes in manufacturing bearings and related repair kits mainly for European and US trucks. In order to increase our business in the market, we will continuously develop new items so as to meet customer's different demands.
C. V. Joint Factory. Under the request of our customers, we just set up our C. V. Joint factory last year. We are confident that we will be able to provide our customers with good quality, rapid new products development as well as timely delivery. We are looking forward to establishing a long term business relationship with the customers al l around the world.
