| Prod Model: |
MG50034 |
| Markets: |
North America,South America,Eastern Europe,Western Europe |
| Sqaure Drive: |
3/8 Inch, 1/2 Inch |
| Size Range: |
75 to 140mm |
| Update Method: |
by Internet |
| Type: |
Oil Filter Wrench |
Product Description
3-Jaw Oil Filter WrenchSuitable for removing and installing oil filters ranging from 75mm to 140mm.
Can be used with 1/2" or 3/8" square drive ratchet handle.
Also used with a 21mm hex spanner.
Similar item:
| Item# | Description |
| MG50033 | Two Way Oil Filter Wrench 55mm -110mm |
An oil-filter wrench is a tool for removing spin-on type oil filters. These filters are smooth, cylindrical canisters with knurling on the bottom that are difficult to grip, especially when they are oily.
One common type of wrench is shown on the right. The loop of chain is placed around the filter, and the bar is turned anticlockwise by hand until the chain wraps itself tightly around the filter. A socket wrench or adjustable spanner is then used to turn the hexagonal bar further in the same direction. This increases the tension in the chain, which bites into the soft metal casing of the oil filter which helps prevent slippage.
Another type uses a metal band that is attached at both ends to a handle. The looped band is placed around the filter and the handle is turned anticlockwise, which puts tension on the band, causing it to grip the filter.
Welcome to Magma Tooling.
We are your turnkey manufacturer located in Ningbo, China. When it comes to outsourcing in China, we are your solution. Consider Magma Tooling, your own factory in China, our facility is logistically located across from the exporting hub in Ningbo, one of the largest port in China.
Magma Tooling was founded in 2001 as mold maker/molding manufacturer/mold manufacturer/mold supplies, specializing in getting products from ideas to drawing, molding to prototype, and mass production to exporting. We can help on mold making/plastic tooling/die casting mold, cover home appliance, automotive parts, industrial products and healthcare equipments. No project is too small for us to tackles, we have in house team of expertise ready to assist your needs. We can take your rough drawings to 2D/3D drawing and polishing it to the ways your products needed to be according to your dimensions. After your art works are finalized and satisfied, at your convenient our factory is equipped with molding equipments to help you with your prototype. Our facility has the technology to assist you with any inconceivable molding needs. We will mail you your prototypes for your inspection before production can begin. Magma Tooling can accommodate from drawing to molding, prototyping, and manufacturing your products or hand tools.
Magma Tooling also can assist you if you are not happy with your current Original Equipment Manufacture (OEM), we can still help you at any stages of your production. Stop searching, you have come to the right place since "Time Is Money. " Our team will do the rest, picking up where others OEM left off.
After years of struggling and encouraged by our customers, we combined our knowledge on mold production and built hand tools/automotive tools line in 2004, we named our line of products "MAGMA TOOLS. " with good feedback and hard work, with great team of manufacturing expertise, in March of 2004, we produced our line of chrome socket set, ratchet handle, 46 and 94 pieces of socket set. Since then, we have produced quality socket set and exported to clients all over the North American and European markets. We can help mass produce your hand tools according to your specific needs, with your branding logo to identify your products.
We welcome your inquiring about produce your project(s) with Magma Tooling. Contact us today by email, phone, fax us to get your quote, and we can start today with your project. We look forward bring your ideas to the market, no projects are to small for us.
Best Regards,
Jason Hsiao
President and CEO
