Ningbo Magma Tooling Co., Ltd. >> 2 PCS 370mm Car Spring Pressure Regulator Tool (MG50078B)

2 PCS 370mm Car Spring Pressure Regulator Tool (MG50078B)

2 PCS 370mm Car Spring Pressure Regulator Tool (MG50078B)
Price: Negotiable/Pairs
Min Order: 100/Pairs
Pay Type: L/C,T/T
2 PCS Spring Pressure Regulator

Maximum jaw opening: 370mm.
Inner 1/2" Drive and outer 19mm.

Similar items:
Item#Description
MG50078A2 Pcs Spring Pressure Regulator 270mm
MG50078C2 Pcs Coil Spring Compressor Set 390mm
MG50168Heavy Duty Coil Spring Compressor Set


How to Use a Brake Spring Tool Correctly

Drum brake maintenance and repair often require the use of a brake spring tool. This handy device is used for positioning shoes, installing parking brake struts and shoe retracting springs, and adjusting screws. These procedures can be done more efficiently if you know how to use your brake spring tool correctly.

1, Apply some grease on your shoe backing plate. Position the shoes while you insert your shoe retaining pin right at the back of your plate, moving all the way through your shoe.

2, Screw your retaining spring cap with your brake spring tool to lock it in place. The brake shoe may move a little while you screw your retaining clip.

3, Install your parking brake strut, placing one end of your slot right inside the primary shoe, which is found near the retracting springs. Screw in the adjusting screws in their appropriate slots with their long ends facing the front side of your vehicle.

4, Install your anchor pin plate at the top of the brake shoe. Fit the cable guide right against the shoe.

5, Install your shoe retracting springs with the spring pliers. Slip the pliers' hooked jaw right over your spring hook and place the other jaw's end inside the hole found at the top of the other brake shoe.

6, Squeeze your pliers' handles together to let the spring slip over the shoe stud. You may need to apply extra force in order to get the springs to slip.
Prod Model: MG50078B
Set Contains: 2 Piece/Item
Update Method: by Internet
Type: Suspension Tools
Welcome to Magma Tooling.

We are your turnkey manufacturer located in Ningbo, China. When it comes to outsourcing in China, we are your solution. Consider Magma Tooling, your own factory in China, our facility is logistically located across from the exporting hub in Ningbo, one of the largest port in China.

Magma Tooling was founded in 2001 as mold maker/molding manufacturer/mold manufacturer/mold supplies, specializing in getting products from ideas to drawing, molding to prototype, and mass production to exporting. We can help on mold making/plastic tooling/die casting mold, cover home appliance, automotive parts, industrial products and healthcare equipments. No project is too small for us to tackles, we have in house team of expertise ready to assist your needs. We can take your rough drawings to 2D/3D drawing and polishing it to the ways your products needed to be according to your dimensions. After your art works are finalized and satisfied, at your convenient our factory is equipped with molding equipments to help you with your prototype. Our facility has the technology to assist you with any inconceivable molding needs. We will mail you your prototypes for your inspection before production can begin. Magma Tooling can accommodate from drawing to molding, prototyping, and manufacturing your products or hand tools.

Magma Tooling also can assist you if you are not happy with your current Original Equipment Manufacture (OEM), we can still help you at any stages of your production. Stop searching, you have come to the right place since "Time Is Money. " Our team will do the rest, picking up where others OEM left off.

After years of struggling and encouraged by our customers, we combined our knowledge on mold production and built hand tools/automotive tools line in 2004, we named our line of products "MAGMA TOOLS. " with good feedback and hard work, with great team of manufacturing expertise, in March of 2004, we produced our line of chrome socket set, ratchet handle, 46 and 94 pieces of socket set. Since then, we have produced quality socket set and exported to clients all over the North American and European markets. We can help mass produce your hand tools according to your specific needs, with your branding logo to identify your products.

We welcome your inquiring about produce your project(s) with Magma Tooling. Contact us today by email, phone, fax us to get your quote, and we can start today with your project. We look forward bring your ideas to the market, no projects are to small for us.

Best Regards,

Jason Hsiao

President and CEO

Send your message to this manufacturer

  • Ningbo Magma Tooling Co., Ltd.

More >

Other Products From This Manufacturer